For those who really can't bear wading through all those minutes of video I will summarise the results below. The video gives a lot more detail though, and features a fluffy bunny. What's not to like?!
When it comes to the things I really liked/disliked about the MM640G you will need to bear in mind that I am comparing to a MiniMed Veo. All of the really good stuff about pumps generally - precise basal patterns, advanced dual and square wave bolus options for tricky meals, ease of use, bolus calculator, temporary basal rates, precision of doses and correction factors, blah, blah, blah... are already assumed to be present and correct. Some of the things I loved about the MM640G are precisely because they fixed annoyances I found with the Veo. But more on that later. First:
The worst of the Medtronic MiniMed 640G
Those who have read any of my reviews before will know that I can get unreasonably irritated by the slightest things. It will come as no surprise then, that while I generally loved the MM640G both with and without sensors, there were a few things about it that drove me nuts.- Pump lock
After a few minutes the pump automatically locks and most interactions require you to play an annoying 'press the right button' game. This is no good if you are in a hurry, and is not an option that can be turned off. - Change of orientation
It's now 'portrait' not 'landscape'. As someone who wears an insulin pump on my belt this is a bit awkward. - No small versions
Medtronic have now abandoned plans to produce a smaller version of the pump. All MM640Gs will now have the little sticky-up bit to accept the larger reservoirs. The smaller reservoirs can still be used, but at present, with approximately 35u/day usage, the 'how full is my reservoir' icon on my status bar is pretty much permanently red. - Sensor overtape irritation
The glue used on the sensor overtapes (and also the little patch that holds the sensor down initially) caused a red rash to appear after a couple of days of wear. Initially it was only toward the end of a sensor but in the end it began pretty much at day 2. I used an alternative dressing, but even that was pretty itchy. Weird - because I don't usually react to adhesives at all. - Sensor swap delays
From start to finish swapping a sensor takes around 3 hours to begin providing new continuous data. That's a looooooong time! - Occasional sensor lag
Mostly I found the sensor accuracy was brilliant. But sometimes, particularly if I treated a low to try to fix a below target BG reading, the sensor was a little slow in responding (perhaps 30 minutes behind reality). Additionally calibrations by BG meter do not necessarily reach up to match sensor glucose and BG fingerstick value, but often end up with some odd half-way house. If the sensor glucose value had drifted a little there were even occasions where calibration triggered an 'alert before high' which was doubly annoying. - Sensor Glucose Review
The one-day graphs which allow you to flick back through previous days' results show no indication of SmartGuard interactions or insulin doses. Makes them about 10% as useful as they could have been. - Home screen without sensors
For no apparent reason, the icons in the status bar do not align neatly when using the MM640G without sensors. There's a gap where one of the sensor icons(!) would go, which makes it look untidy and poorly considered. The enormous dotted line 'we have no BG information to show you' panel where recent meter BG readings go (when not using sensors) also irritated me more than strictly necessary. Just doesn't feel like the visual look of the home screen for most UK users, who will be using the MM640G without sensors, was given enough finesse.
Watch the video
The grumbles, gripes, and irritations - everyone will have their own, I'm sure.The best of the Medtronic MiniMed 640G
Whether you use the MM640G with sensors or not there is a LOT to like about it. There are all sorts of little, pleasing improvements in the interface and options that make a massive difference. Add the wizardry of SmartGuard into the mix and things are taken to another level - but even without there are lots of tasty treats for non-sensor users.- Setting basals and temp basals
There are now up to five basal patterns on the MM640G, and brilliantly you can copy entire patterns from one 'slot' to another to experiment with and then switch back if you need to later. The patterns also come with helpful names to keep track of which are which: Work Day, Day Off, Sick Day, Pattern 1, Pattern 2. Which pattern is set is not marked on the home screen, but thankfully setting any of them does not cause the 'alert circle' to appear like it did on the Veo.
Temp basals can now be set in 15 minute increments for more precision and alter up and down by 5% at a time making them much quicker and less fiddly to set. - No TBR 'chime'
Setting a Temporary Basal Rate no longer causes the pump to issue a useless wittery alert tone every hour, which means you can ACTUALLY USE THEM OVERNIGHT! In even better news - the end of a TBR is now indicated by a single beep. Brilliant! - Different Alert Tones
There are now a series of different alert tones to indicate different things. There were a few on the Veo, but so many overlapped with either 'pip-pip-pip' or 'naah-naah-naah' that I find it much easier to work out what is going on on the MM640G without having to check the pump for 'information' alerts and being alerted (ha!) to things that actually require action. The ability to increase volume has also significantly improved. - No lockout during bolus delivery
It is possible on the MM640G to do rather more things during the time while a reasonable sized bolus is being delivered - for example you can set a TBR. The Veo made you wait until the bolus had finished before allowing you to do anything (other than stop the bolus!). This meant I could group my pump interactions together and then get on with life, rather than having to wait around tutting. - Screen visibility in sunlight
Really, really good - especially compared to some other colour-screen diabetes gadgetry I have tried. Not perfect from every angle, but really easy to turn a little and see very clearly even in direct sunlight. - Remote boluses from BG meter
Not a full remote control with bolus wizard, but a really useful standby when digging your pump out from within clothing is impractical or inconvenient. - Waterproof
Now rated as IPX8 - up to 12 feet of water for up to 24 hours. - SmartGuard - overnight hypoglycaemia
Unsurprising if you have watched my Overnight Hypoglycaemia post, but SmartGuard overnight for me was a real stand-out winner. No readings at all for 9 weeks below 3.5mmol/L overnight, and hardly any below 4.0mmol/L. Some nights almost no basal insulin required, and others requiring my more 'usual' 6-7 units at night. Looking at the results it's hardly surprising I had so many problems and so much Severe Hypoglycaemia during my years on Lantus! - SmartGuard - results overall
When compared to averaged results from 10 weeks of Libre sensors (the only other 24 hour data I have) time in hypoglycaemia fell by 90% during my 9 weeks with the MiniMed 640G. At the same time my overall levels, as measured by HbA1c fell by 0.3%. And all this with less effort and very little 'alarm fatigue'.
Watch the video
Improvements to the pump (with and without sensors) and the all important results.Conclusion
It has been a great privilege to experience the MM640G system, and for me the results were spectacularly good. The comparison with Libre data is an interesting one, particularly where hypoglycaemia is concerned. Times wearing a Libre sensor were previously my 'best ever' results-wise. The ability to spot hypos coming during the day and try to head them off (I generally scan a Libre sensor something like 30-40 times a day), plus the ability to spot low levels overnight and make hurried basal rate changes meant that I generally had fewer hypos on a Libre than I would normally. And yet when compared to these data, the MM640G system reduced my time spent in hypoglycaemia by 90%. To be clear, that means that for every 10 minutes I spent below 4.0mmol/L trying my very hardest with a Libre sensor, I would spend only one minute when using SmartGuard. That and my HbA1c dropped over the same period from 6.3% to 6.0%. 0.3% - it's not a huge margin, but those fractions are pretty tricky to shave off once you get down below 7.0 in my experience.My only hint of melancholy about the whole experience is, of course, the eye-watering cost of full-time sensor coverage (approx £3,500 per year inc transmitter). It's not something we as a family can afford, and full time CGM on the NHS is reserved for those who really need it most - and rightly so.
It feels a little like being given a chance to live in a multi-million pound mansion and drive an Aston Martin for a few weeks to see how I like it. I may think it's brilliant - but the reality is that it's not really an option that is really open to me long-term.
I have a pump clinic coming up in a week or two and will see what they say about the results - particularly my unpredictable and occasionally lengthy periods spent below 4.0 overnight. These do nothing to help my efforts to keep my Imparired Awareness of Hypoglycaemia under control. I may ask about the possibility of part-time sensor coverage. Even a few months in a year would make a massive difference (as long as the transmitter continued to function, of course).
My Veo is nearing the end of its warranty period, so I am looking to the future. I have some thinking and some sums to do after this experience - depending on what my clinic say.
Final verdict (with sensors and SmartGuard): 5/5
Final verdict (without sensors): 4/5
Final verdict (considering self-funding sensors): 4/5*
* because of Dexcom's more 'stretchable' reputation when it comes to sensor life
Disclaimer: I was offered a trial of the Medtronic MiniMed 640G system for 64 Days with full sensor coverage so that I could share my opinion and experience good or bad. I was not paid to write this post, and if I had thought the pump was terrible I would have written that. I was encouraged (not required) to post video blogs about my experience, but Medtronic did not have any control over what I posted.
No comments:
Post a Comment